Powdered Base Nutrients

View

VEG+BLOOM Dirty (Soil), base nutrient

VEG+BLOOM Dirty (Soil)

VEG+BLOOM Hard/Dirty (HD) – Powder Base Nutrient for Hydroponics, Coco & Aeroponics VEG+BLOOM Hard/Dirty (HD) by Hydroponic Research is a professional, single-part powder base nutrient designed to simplify plant feeding throughout vegetative growth and flowering. Combining characteristics of the VEG+BLOOM Tap/Hard and Dirty formulations, this concentrated nutrient provides essential minerals to support healthy roots, vigorous foliage, strong stems and productive flowering. Its convenient powder formulation eliminates the need for separate Grow and Bloom base nutrients, making it an excellent choice for growers seeking a straightforward feeding programme from early growth through to flowering. Suitable Growing Media & Systems VEG+BLOOM Hard/Dirty is recommended for coco, hydroponic and aeroponic systems using water with a starting EC of approximately 0.0–0.4 mS/cm. Suitable growing media and systems include: Coco Coir: Suitable for coco-based growing media and drip irrigation systems. Rockwool: Ideal for rockwool blocks, slabs and hydroponic cultivation. Clay Pebbles: Suitable for expanded clay aggregates in active hydroponic systems. Perlite: Compatible with inert hydroponic growing media. NFT Systems: Suitable for Nutrient Film Technique cultivation. DWC Systems: Compatible with Deep Water Culture systems. Flood & Drain: Suitable for ebb and flow hydroponic cultivation. Aeroponics: Suitable for water-based aeroponic growing systems. Drip Irrigation: Suitable for hydroponic drip-fed applications. For conventional soil and peat-based cultivation, VEG+BLOOM Dirty is the manufacturer's designated formulation. Recommended Dilution Rates VEG+BLOOM Hard/Dirty is a concentrated powder nutrient that should be thoroughly dissolved in water before feeding. Indicative feeding range: 0.8–1.6g per litre, depending on growth stage, water quality and plant requirements. Growth Stage Dosage per Litre Rooted Cuttings & Young Plants 0.8g Vegetative Growth 1.6g Transition to Flowering 1.6g Early Flowering 1.6g Mid Flowering 1.6g Late Flowering 0.8g Final Finishing Stage Follow finishing schedule Example Mixing Quantities For established plants using an indicative dosage of 1.6g per litre: Water Volume VEG+BLOOM Hard/Dirty 1 Litre 1.6g 5 Litres 8g 10 Litres 16g 20 Litres 32g 50 Litres 80g 100 Litres 160g Mixing Instructions: Fill the nutrient reservoir with the required amount of water. Weigh the appropriate quantity of VEG+BLOOM powder. Gradually add the powder to the water while stirring. Mix thoroughly to distribute the nutrients. Check the EC and pH of the finished solution. Adjust the feeding strength according to plant requirements. Always follow the current product-specific feeding instructions. The rates above are indicative and should be adjusted to suit the crop. When to Use During the Growing Cycle Growth Stages: Vegetative Growth & Flowering VEG+BLOOM Hard/Dirty is designed to provide base nutrition throughout the main growing cycle without requiring a change between separate vegetative and flowering products. Rooted Cuttings & Early Growth: Begin with a reduced nutrient concentration to support early root development and young plant establishment. Vegetative Growth: Increase feeding strength as plants develop, supporting healthy foliage, vigorous root growth and strong stems. Transition to Flowering: Continue feeding as plants move from vegetative growth into the flowering stage. Early Flowering: Maintain suitable nutrient levels to support flower formation and early development. Mid Flowering: Continue feeding to provide essential minerals during active flower and fruit development. Late Flowering: Reduce nutrient strength as appropriate for the crop and feeding schedule. Final Finishing Stage: Follow the manufacturer's recommended finishing programme. Key Benefits Complete single-part powder base nutrient. Suitable for hydroponics, coco and aeroponic growing systems. Designed for vegetative growth and flowering. Combines characteristics of VEG+BLOOM Tap/Hard and Dirty formulations. Supplies essential plant macro and micronutrients. Supports vigorous root development and healthy foliage. Encourages strong stems and productive flowering. Concentrated powder format for convenient storage and measurement. No need for separate Grow and Bloom base nutrients. Suitable for a range of recirculating and run-to-waste systems. Designed for water with a starting EC of approximately 0.0–0.4 mS/cm. VEG+BLOOM Hard/Dirty (HD) provides a convenient all-in-one feeding solution for growers seeking consistent plant nutrition from vegetative growth through flowering. Its concentrated powder formulation simplifies nutrient management while supporting healthy plant development throughout the growing cycle.

Regular price £129.99
Regular price Sale price £129.99
Unit price  per 
View product
Dutch Pro 1 Component Bloom Powder Nutrient main

Dutch Pro 1 Component Bloom Powder Nutrient

Dutch Pro 1 Component Bloom Powder Nutrient — Pack sizes and options: 500 g; 1 kg; 2.5 kg; 5 kg. Dutch Pro 1 Component Bloom Powder Nutrient – All-in-One Feed for Hard & Soft Water Available Sizes: 500g, 1kg, 2.5kg & 5kg Dutch Pro 1 Component Bloom Powder Nutrient is a concentrated, all-in-one plant feed specially formulated to provide essential nutrition throughout the flowering and blooming stage. Designed for simplicity and performance, this convenient powder formula eliminates the need for separate A & B base nutrients, making feeding quicker, easier and more economical. Suitable for use with both hard and soft water, Dutch Pro 1 Component Bloom Powder provides a balanced supply of essential nutrients to support plants as their nutritional requirements change during flowering. Complete Nutrition for the Blooming Stage As plants move from vegetative growth into flowering, their nutrient requirements change significantly. Dutch Pro 1 Component Bloom Powder is formulated to provide the essential macro and micronutrients required during this important stage, supporting healthy flowering, strong plant development and consistent nutrient availability. The highly concentrated powder dissolves easily into water, allowing growers to prepare fresh nutrient solutions while reducing the storage space and packaging associated with traditional liquid fertilisers. Key Benefits All-in-one bloom nutrient – no separate A & B base nutrients required Specially formulated for the flowering and blooming stage Suitable for hard and soft water Highly concentrated and economical powder formula Provides essential macro and micronutrients Supports healthy flowering and plant development Easy to measure, mix and store Excellent choice for small or large growing environments Professional-quality nutrition from Dutch Pro Available in 500g, 1kg, 2.5kg and 5kg sizes Whether you're looking for a compact 500g pack or the economical 5kg option for larger growing environments, Dutch Pro 1 Component Bloom Powder Nutrient provides a simple and efficient way to deliver dependable base nutrition throughout the flowering stage.

Regular price £20.00
Regular price Sale price £20.00
Unit price  per 
View product
Dutch Pro 1 Component Grow Powder Nutrient

Dutch Pro 1 Component Grow Powder Nutrient

Dutch Pro 1 Component Grow Powder Nutrient — Pack sizes and options: 500 g; 1 kg; 2.5 kg; 5 kg. Dutch Pro 1 Component Grow Powder Nutrient – All-in-One Feed for Hard & Soft Water Available Sizes: 500g, 1kg, 2.5kg & 5kg Dutch Pro 1 Component Grow Powder Nutrient is a convenient, concentrated all-in-one plant feed designed to support strong, healthy growth throughout the vegetative stage. Suitable for growers looking for a straightforward feeding programme, this easy-to-use powdered nutrient provides essential nutrition from one product, removing the need to mix separate A & B base nutrients. Formulated for use with both hard and soft water, Dutch Pro 1 Component Grow Powder offers excellent versatility across a wide range of growing environments. Its concentrated powder format is economical, easy to store and ideal for growers who want professional-quality nutrition without the bulk associated with traditional liquid feeds. Complete Nutrition for Vigorous Growth During the vegetative stage, plants require balanced nutrition to establish strong roots, healthy foliage and sturdy stems before entering flowering. Dutch Pro 1 Component Grow Powder delivers essential macro and micronutrients in a readily available form, helping plants maintain consistent development and healthy green growth. The highly soluble powder mixes easily with water, making nutrient preparation quick and convenient. Its concentrated formulation also makes it an excellent option for larger gardens and growers looking to reduce storage space. Key Benefits All-in-one grow nutrient – no separate A & B bottles required Designed for the vegetative/growth stage Suitable for hard and soft water Concentrated and economical powder formula Helps promote healthy roots, stems and foliage Easy to dissolve, measure and store Ideal for both smaller gardens and larger growing environments Trusted Dutch Pro plant nutrition Choose the size that suits your growing requirements, with 500g, 1kg, 2.5kg and 5kg packs available. Dutch Pro 1 Component Grow Powder Nutrient provides a simple, efficient and cost-effective way to deliver dependable base nutrition throughout the crucial vegetative stage.

Regular price £20.00
Regular price Sale price £20.00
Unit price  per 
View product
Dutch Pro Quantum Massive Powdershot – High PK Late Flower Booster (Powdered Bloom Enhancer) - MAIN

Dutch Pro Massive Powder Shot

Dutch Pro Massive Powder Shot — Pack sizes and options: 50 g; 250 g; 500 g; 1 kg; 2.5 kg. Dutch Pro Quantum Massive Powdershot – High PK Bloom Booster Push your flowering programme further with Dutch Pro Quantum Massive Powdershot, a professional-strength high PK powdered bloom booster developed specifically for the crucial late flowering stage. During late bloom, plants have increased demands for phosphorus and potassium. Quantum Massive Powdershot delivers a highly concentrated source of these key nutrients, supporting flower formation, nutrient transport, energy transfer and dense floral development. Its concentrated powdered formula provides excellent storage stability while giving experienced growers precise control over their feeding programme. Suitable for soil, coco and hydroponic growing systems, Powdershot is designed to complement a balanced base nutrient such as Dutch Pro Bloom A&B. Key Benefits High PK bloom booster for late flowering High phosphorus to support energy transfer and flower development High potassium to support nutrient transport and flower density Highly concentrated powdered formula Precise and economical dosing Suitable for soil, coco and hydroponics Ideal alongside Dutch Pro Bloom nutrients Designed for the final stages of flowering Recommended Dosage Soil: 1g per litreCoco: 1–1.5g per litreHydroponics: 1g per litre – monitor EC closely Begin using from approximately week 5–6 of flowering, depending on plant variety and flowering duration. Use for around 2–4 weeks and discontinue 7–10 days before harvest when beginning your final flush. Always fully dissolve the powder in water before adding it to your nutrient reservoir. Use alongside a balanced base nutrient programme and regularly monitor EC to prevent overfeeding.

Regular price £12.49
Regular price Sale price £12.49
Unit price  per 
View product
Veg Bloom VBX CLEAN  Dripper Friendly Version

Veg Bloom VBX CLEAN Dripper Friendly Version

Veg+Bloom VBX CLEAN – Dripper-Friendly Powder Nutrients for Hydroponics, Coco & Soil Veg+Bloom VBX CLEAN – Dripper-Friendly Version is a premium, highly soluble, single-part powdered base nutrient specifically developed to promote vigorous vegetative growth, strong root development, healthy flowering and high-quality harvests. Manufactured by Hydroponic Research, VBX CLEAN combines the nutritional benefits of Veg+Bloom, STAX and Life+ into one convenient formula, providing essential macronutrients, micronutrients and additional plant-supporting compounds throughout the growing cycle. Specially developed for modern LED growing environments, VBX CLEAN contains enhanced calcium and magnesium nutrition to support healthy plant development under high-intensity lighting. Its improved dripper-friendly formulation is designed to dissolve cleanly in water, helping reduce nutrient residue and the risk of blocked irrigation lines. This makes it an excellent choice for automated feeding systems, drip irrigation and high-frequency fertigation. Unlike conventional Grow and Bloom fertilisers, VBX CLEAN can be used from early root establishment through vegetative growth and flowering, with nutrient strength adjusted to suit each stage. Suitable Growing Media & Systems Veg+Bloom VBX CLEAN is suitable for a wide range of growing media and cultivation methods. Recommended Growing Media: Hydroponics: Suitable for water-based hydroponic growing systems. Coco Coir: Ideal for coco substrates and coco/perlite growing mixtures. Rockwool: Suitable for rockwool cubes, blocks and slabs. Clay Pebbles: Compatible with expanded clay pebbles in hydroponic growing systems. Perlite: Suitable for perlite-based and other inert growing substrates. Soil & Compost: Can be used in soil and peat-based growing media. Soilless Growing Media: Suitable for various inert and mixed-substrate cultivation methods. Compatible Growing Systems: Automated Drip Irrigation Run-to-Waste Hydroponics Recirculating Hydroponics Flood & Drain / Ebb & Flow Nutrient Film Technique (NFT) Deep Water Culture (DWC) Recirculating Deep Water Culture (RDWC) Hand-Watered Growing Systems Important: VBX CLEAN is specifically developed to improve solubility and reduce clogging in drip irrigation systems. Filters, irrigation lines and reservoirs should still be inspected and maintained regularly. Recommended Dilution Rates Veg+Bloom VBX CLEAN is a highly concentrated powdered fertiliser and must be dissolved thoroughly in water before application. Manufacturer-Style Feeding Guidance: Growth Stage VBX CLEAN per Litre Start / Root Establishment 1.6–2.1 g/L Vegetative Growth 1.85–2.4 g/L Pre-Flowering / Transition 1.85–2.4 g/L Early & Mid Flowering 1.6–2.1 g/L Late Flowering 0.8–1.1 g/L Final Finishing Stage Follow finishing programme These are approximate metric conversions of the published Veg+Bloom VBX feeding recommendations, originally expressed in grams per US gallon. Always adjust nutrient strength according to plant requirements, water quality, growing conditions and EC readings. Standard Mixing Quantities Water Volume Vegetative Feed (1.85 g/L) Early Flowering (1.6 g/L) 1 Litre 1.85 g 1.6 g 5 Litres 9.25 g 8 g 10 Litres 18.5 g 16 g 25 Litres 46.25 g 40 g 50 Litres 92.5 g 80 g 100 Litres 185 g 160 g Example: For a 10-litre reservoir during vegetative growth, dissolve approximately 18.5 g of VBX CLEAN into water, then check the final EC and pH. Important: Dilution is measured in grams per litre (g/L), not millilitres. Use an accurate digital scale to measure the required quantity of powdered nutrients. When to Use During the Growing Cycle Propagation & Root Establishment VBX CLEAN can be introduced once seedlings or rooted cuttings are established and ready to receive additional nutrients. Published VBX guidance specifies approximately 1.6–2.1 g/L during the rooting stage. For young or sensitive plants, use an appropriately reduced concentration guided by EC and plant response. During this stage, VBX CLEAN provides essential nutrients to support healthy roots and early plant development. Vegetative Growth Increase the recommended concentration to approximately 1.85–2.4 g/L during established vegetative growth. The balanced formulation supports: Vigorous green foliage. Strong root development. Healthy stem and shoot formation. Efficient nutrient absorption. Robust plant structure. VBX CLEAN is designed for use throughout the vegetative period, including cultivation under high-intensity LED grow lights. Pre-Flowering / Transition Continue using VBX CLEAN at approximately 1.85–2.4 g/L as plants transition from vegetative growth into flowering. The nutrient formula supports continued plant development and helps meet changing nutritional requirements during the transition. Early & Mid Flowering Reduce the base nutrient concentration to approximately 1.6–2.1 g/L during the main flowering stage. VBX CLEAN continues to supply essential nutrients to support flower formation, healthy plant growth and efficient mineral uptake. The manufacturer's complete feeding programme also includes Veg+Bloom SHINE CLEAN, a complementary flowering additive that can be introduced during the bloom phase. Late Flowering Gradually reduce VBX CLEAN to approximately 0.8–1.1 g/L as plants approach the final flowering stages. This progressive reduction helps manage nutrient strength as plants mature. Final Finishing Stage Follow the appropriate Veg+Bloom finishing programme for the crop. The published VBX feeding programme reduces and eventually discontinues the base nutrient during the finishing period, with the timing depending on the growing medium and flowering requirements. The duration of each stage will vary according to plant variety, growing environment and cultivation method. Dripper-Friendly CLEAN Technology One of the main advantages of Veg+Bloom VBX CLEAN is its improved solubility. The specialised formulation is designed to dissolve more efficiently than the standard VBX formula, helping reduce the risk of deposits accumulating inside drip irrigation systems. Key Advantages: Designed to reduce blocked drip emitters. Helps minimise nutrient residue inside irrigation lines. Supports consistent nutrient delivery. Suitable for automated irrigation systems. Ideal for high-frequency fertigation. Simplifies reservoir nutrient management. Suitable for both professional and hobby growers. This makes VBX CLEAN particularly useful for growers using automated hydroponic systems where reliable nutrient flow is essential. One-Part Powdered Nutrient System Veg+Bloom VBX CLEAN simplifies plant feeding by combining several nutritional components into one concentrated powder. Veg+Bloom Base Nutrition Supplies essential macronutrients and micronutrients required for healthy vegetative growth and flowering. STAX Technology Incorporates additional plant-supporting nutrition designed to promote robust structure and healthy development. Life+ Components Includes complementary plant-supporting compounds intended to encourage efficient nutrient utilisation and healthy root-zone activity. LED-Optimised Nutrition Includes enhanced calcium and magnesium nutrition to support plant development in demanding indoor growing environments. Unlike conventional A&B fertilisers, VBX CLEAN does not require separate Part A and Part B bottles. Recommended pH & EC Management Maintaining the correct nutrient solution strength is important for healthy plant development. General pH Guidelines: Hydroponics & Rockwool: Approximately 5.5–6.2 Coco Coir: Approximately 5.8–6.2 Soil & Compost: Adjust according to substrate requirements Nutrient Strength Guidelines Growth Stage Indicative EC Root Establishment 1.8–2.0 mS/cm Established Vegetative Growth 2.2–2.4 mS/cm Flowering Transition 2.2–2.4 mS/cm Early & Mid Flowering 2.4–2.5 mS/cm Late Flowering 1.2–1.5 mS/cm These EC figures are from the published VBX feeding programme and should not be treated as universal targets for all plant varieties. Always account for the starting water EC and any additional supplements. Young plants, sensitive crops and different growing media may require lower concentrations. Mixing Instructions Fill the nutrient reservoir with clean water. Measure the required quantity of VBX CLEAN using an accurate digital scale. Slowly add the powder to the water while stirring or circulating. Mix thoroughly until the nutrient powder has dissolved. Add any compatible Veg+Bloom supplements according to the selected feeding programme. Check the nutrient solution EC and adjust where necessary. Check and adjust pH according to the growing medium. Ensure the solution is properly mixed before operating automated irrigation equipment. Regularly inspect and clean reservoirs, filters and drip irrigation lines. Important: Always dissolve VBX CLEAN thoroughly before feeding. Never add undissolved nutrient powder directly into drip irrigation lines or plant root zones. Key Benefits Premium highly soluble, single-part powdered base nutrient. Specifically developed for dripper-friendly hydroponic cultivation. Suitable for vegetative growth and flowering. Combines Veg+Bloom, STAX and Life+ technologies. Supports vigorous root development and healthy green foliage. Encourages strong stems and robust plant structure. Supports healthy flower formation and fruit development. Enhanced calcium and magnesium nutrition for LED cultivation. Designed to reduce nutrient residue and blocked drip emitters. Suitable for hydroponics, coco, rockwool and soil. Compatible with automated drip irrigation and fertigation systems. Highly concentrated formula for economical feeding. No separate A&B nutrients required. Compatible with Veg+Bloom PUSH and SHINE CLEAN feeding programmes. Suitable for professional and hobby horticultural growers. Why Choose Veg+Bloom VBX CLEAN? Veg+Bloom VBX CLEAN – Dripper-Friendly Version delivers professional-grade plant nutrition in a convenient, highly soluble, single-part powdered formula. Combining essential mineral nutrients with additional plant-supporting technology, VBX CLEAN provides a complete base feeding solution designed to support strong roots, vigorous vegetative growth and healthy flowering. Its improved solubility makes it particularly suitable for automated irrigation and drip-fed growing systems, helping growers maintain consistent nutrient delivery while reducing the risk of blocked emitters. Whether growing in hydroponics, coco coir, rockwool or soil, Veg+Bloom VBX CLEAN provides reliable, concentrated nutrition to support healthy plant development and productive harvests throughout the growing cycle.

Regular price £24.99
Regular price Sale price £24.99
Unit price  per 
View product
VEG+BLOOM RO/Soft – Powder Base Nutrient for Hydroponics, Coco & Aeroponics

VEG+BLOOM RO/Soft

VEG+BLOOM RO/Soft – Powder Base Nutrient for Hydroponics, Coco & Aeroponics VEG+BLOOM RO/Soft by Hydroponic Research is a professional, single-part, water-soluble powder nutrient specifically formulated for growers using reverse osmosis (RO), purified or soft water. Designed to deliver balanced plant nutrition throughout both vegetative growth and flowering, this concentrated fertiliser provides essential macro and micronutrients to support strong roots, vigorous foliage, healthy flower development and productive harvests. Unlike traditional two-part liquid nutrients, VEG+BLOOM RO/Soft combines essential plant nutrients into one convenient powder formula, simplifying feeding schedules and reducing the need for multiple base nutrient products. Suitable Growing Media & Systems VEG+BLOOM RO/Soft is designed for hydroponic and soilless cultivation using water with a starting EC of 0.0–0.3 mS/cm. Suitable growing media and systems include: Coco Coir: Ideal for coco-based growing media and drip irrigation systems. Rockwool: Suitable for rockwool blocks, slabs and hydroponic cultivation. Clay Pebbles: Compatible with expanded clay aggregates used in hydroponic systems. NFT Systems: Suitable for Nutrient Film Technique systems. DWC Systems: Suitable for Deep Water Culture and recirculating reservoirs. Aeroponics: Suitable for aeroponic growing systems. Flood & Drain: Compatible with ebb and flow hydroponic systems. Important: For conventional soil or peat-based cultivation, VEG+BLOOM Dirty is the more appropriate formulation. Growers using harder tap water should consider VEG+BLOOM Tap/Hard. Recommended Dilution Rates VEG+BLOOM RO/Soft is a concentrated powder nutrient that must be fully dissolved in water before application. Recommended feeding rates vary depending on the growth stage, plant requirements and water quality. Growth Stage Dosage per Litre Seedlings & Rooted Cuttings 0.8g Vegetative Growth 1.6g Transition to Flowering 1.6g Early Flowering 1.6g Mid Flowering 1.6g Late Flowering 0.8g Final Flowering Stage Discontinue base feed according to schedule Example Mixing Quantities – Established Growth Water Volume VEG+BLOOM RO/Soft 1 Litre 1.6g 5 Litres 8g 10 Litres 16g 20 Litres 32g 50 Litres 80g 100 Litres 160g These are rounded conversions of the manufacturer's medium-strength feeding schedule, which specifies approximately 3g or 6g per US gallon depending on growth stage. Always measure the powder accurately, dissolve thoroughly and monitor the final EC and pH before feeding. When to Use During the Growing Cycle Growth Stages: Propagation, Vegetative Growth & Flowering VEG+BLOOM RO/Soft is designed to be used as the main base nutrient throughout most of the growing cycle, eliminating the need to switch between separate Grow and Bloom formulas. Propagation & Root Development: Begin with a reduced concentration once seedlings or cuttings have established roots, usually during the first 14 days. Vegetative Growth: Increase nutrient concentration to support vigorous leaf development, strong stems and healthy root growth. Transition to Flowering: Continue feeding during the first 14–21 days of flowering to support plant development. Early Flowering: Maintain the recommended nutrient concentration to encourage healthy flower formation. Mid Flowering: Continue feeding as flowers and fruits develop. Late Flowering: Gradually reduce the base nutrient concentration as plants approach maturity. Final Flowering Stage: Follow the manufacturer's finishing schedule and discontinue the base nutrient at the recommended stage. Key Benefits Complete single-part powder base nutrient. Specially formulated for reverse osmosis and soft water. Suitable for hydroponics, coco and aeroponic cultivation. Supports vegetative growth and flowering with one formula. Contains essential macro and micronutrients. Highly concentrated water-soluble powder. Eliminates the need for separate Grow and Bloom base feeds. Suitable for recirculating and run-to-waste systems. Helps simplify nutrient management and feeding schedules. Ideal for professional and hobby hydroponic growers. VEG+BLOOM RO/Soft provides a convenient, highly concentrated nutrient solution for growers looking to simplify plant feeding without compromising nutritional balance. Its versatile single-part formulation makes it an excellent choice for supporting vigorous growth, healthy flowering and consistent results throughout the growing cycle.

Regular price £19.99
Regular price Sale price £19.99
Unit price  per 
View product
VEG+BLOOM VBX

VEG+BLOOM VBX

VEG+BLOOM VBX — Pack sizes and options: 450 g; 2.27 kg; 11.34 kg; 45.36 kg. VEG+BLOOM VBX – Premium Nutrition for Vegetative Growth VEG+BLOOM VBX is a top-tier nutrient solution designed to support vigorous vegetative growth and robust root development. This specialised formula ensures your plants have access to a balanced mix of essential macro and micronutrients, setting the stage for healthy, lush foliage and strong foundations. Suitable for all grow mediums, including soil, coco, and hydroponics, VEG+BLOOM VBX simplifies your nutrient regimen while delivering outstanding results. Whether you’re a seasoned grower or just starting out, VBX is your go-to formula for achieving healthy, thriving plants. Key Benefits Boosts Vegetative Growth: Supplies the right nutrients to promote rapid, lush foliage and sturdy stems. Strengthens Root Development: Enhances root structure, improving nutrient and water uptake for overall plant health. All-In-One Formula: Simplifies your feeding schedule by providing a complete nutrient solution in one product. Versatile Application: Works seamlessly with soil, coco, and hydroponic systems, offering flexibility for any growing setup. Highly Concentrated: Delivers powerful results with minimal product, making it a cost-effective choice for growers. How to Use VEG+BLOOM VBX Mixing Instructions: Dissolve the recommended dosage into your water and stir well to ensure the nutrients are evenly distributed. Application: Water your plants with the nutrient solution, ensuring even saturation of the root zone. Adjust the strength based on the stage of growth and plant response. Feeding Schedule: Use regularly during the vegetative phase for best results, transitioning to a bloom formula as your plants enter the flowering stage. Ideal Uses Vegetative Stage: Optimised for use during the vegetative phase to promote vigorous, healthy growth. All Grow Mediums: Suitable for soil, coco, and hydroponic systems, providing consistent nutrition across different setups. High-Yield Gardens: Perfect for growers aiming to maximise their plants’ potential during the early growth stages. Product Specifications Form: Powdered nutrient solution for easy mixing Application: Designed for use during the vegetative stage of plant growth Compatibility: Works well in soil, coco, and hydroponic growing environments Packaging: Available in multiple sizes to meet the needs of both hobby and commercial growers Why Choose VEG+BLOOM VBX? Promotes Healthy Growth: Provides a balanced nutrient profile to support lush, rapid vegetative development. Simplifies Feeding: One product covers all your plants’ nutritional needs during the vegetative phase, making feeding hassle-free. Enhances Root Health: Encourages the development of a strong, healthy root system, essential for nutrient and water uptake. Trusted by Growers: Used by professional and hobbyist growers worldwide for consistent and reliable results. Tips for Best Results Monitor pH and EC Levels: Regularly check and adjust the pH and electrical conductivity (EC) of your nutrient solution to optimise nutrient uptake. Adjust Dosage: Start with a lower dosage and increase gradually as your plants grow and require more nutrients. Proper Storage: Store in a cool, dry place to maintain the quality and effectiveness of the product. Order Your VEG+BLOOM VBX Today Achieve lush, healthy vegetative growth with VEG+BLOOM VBX, the ultimate nutrient solution for robust plants and strong roots. Order now from Senua Hydroponics and give your garden the nutrition it needs for a thriving, productive start! Perfect for all grow mediums and growth stages.

Regular price £24.99
Regular price Sale price £24.99
Unit price  per 
View product
Athena - Pro Line - Bloom

Athena - Pro Line - Bloom

Athena - Pro Line - Bloom — Pack sizes and options: 4.55 kg; 11.3 kg. Athena Nutrients - Pro Line Bloom for Superior Flowering and High Yields Athena Nutrients Pro Line Bloom is a premium formula designed to enhance the flowering stage of plants, providing the essential nutrients necessary for developing strong, dense buds and abundant fruits. This high-quality nutrient solution is crafted to meet the needs of professional growers, delivering balanced ratios of phosphorus, potassium, and key micronutrients to drive maximum flower production and improved crop quality. Formulated for hydroponic, coco coir, and soil-based systems, Athena Pro Line Bloom works seamlessly to boost flower development, ensuring your plants have everything they need to thrive during this critical stage. Why Use Athena Pro Line Bloom in Your Growing System? During the flowering phase, plants demand higher levels of phosphorus and potassium to support the production of flowers, buds, and fruits. Athena Bloom provides these essential nutrients in the correct balance, promoting faster flower development, larger yields, and higher-quality crops. Its formula also includes micronutrients such as iron, manganese, and zinc, ensuring complete nutrition for optimal plant health. Whether you’re growing indoors or outdoors, in hydroponics or soil, Athena Bloom provides a targeted nutrient solution that helps plants reach their full potential. Benefits of Athena Pro Line Bloom Optimises Flowering: Provides essential nutrients that help plants form large, dense flowers and improve overall fruit and bud quality. Balanced Phosphorus and Potassium: Delivers the right ratio of P and K for flower production, ensuring that plants are properly fed during this demanding growth stage. Enhanced Yields: By promoting healthy flowering and fruiting, Athena Bloom helps growers achieve larger, more abundant harvests. Micronutrient Support: Contains important trace elements such as iron, zinc, and manganese, supporting overall plant health and preventing nutrient deficiencies. Compatible with All Growing Mediums: Works efficiently in hydroponic systems, coco coir, and soil, offering flexibility for a range of growing setups. How Athena Pro Line Bloom Works Phosphorus (P) plays a key role in energy transfer within the plant, particularly in the form of ATP, which is necessary for photosynthesis and other vital functions. During the flowering stage, phosphorus is crucial for bud formation and flower density. Potassium (K) supports water regulation, enzyme activity, and carbohydrate metabolism. It helps plants develop stronger flowers and fruits by improving cell wall integrity and stress resistance. The inclusion of micronutrients in Athena Bloom ensures that plants receive well-rounded nutrition, preventing common deficiencies that can limit flowering potential. How to Use Athena Pro Line Bloom for Best Results Dosage: Follow the product’s dosing instructions, typically adding Athena Bloom during the flowering phase at the recommended strength for your system. Mixing: Ensure thorough mixing when adding Athena Bloom to your nutrient solution. Combine it with the rest of your nutrients to create a well-balanced feed. Monitor Plant Health: Regularly check plant growth and adjust nutrient levels as needed to ensure optimal flower development and yield. Boost Flower Development with Athena Pro Line Bloom from Senua Hydroponics At Senua Hydroponics, we offer Athena Pro Line Bloom to help growers achieve superior flowering results and higher yields. Whether you’re growing hydroponically or in soil, Athena Bloom delivers the essential nutrients your plants need to thrive during the critical flowering stage.

Regular price £74.99
Regular price Sale price £74.99
Unit price  per 
View product
Athena Pro Line Core

Athena Pro Line Core

Athena Pro Line Core — Pack sizes and options: 4.55 kg; 11.3 kg. Athena Pro Core – Fully Soluble Nutrient for Optimised Plant Health Athena Pro Core is a premium, fully soluble dry fertiliser designed to promote healthy growth and maximise plant potential. Developed by Athena Nutrients in Los Angeles, California, this product is engineered for use in professional grow rooms and large-scale cultivation. Pro Core forms the foundation of the Athena Pro Line, delivering a balanced blend of essential macronutrients and trace elements to support vigorous, consistent plant development throughout the growth cycle. Free from heavy metal content and engineered to leave zero particulates or sediment in your nutrient reservoir, Athena Pro Core ensures clean and efficient nutrient delivery for any hydroponic system. Key Benefits Fully Soluble Formula: Dissolves completely without leaving sediment or particulates, ensuring smooth nutrient uptake and clean irrigation systems. Optimised Nutrient Balance: Provides a precise mix of macronutrients and trace elements to support robust, healthy plant growth. Ideal for Large Grow Rooms: Trusted by commercial cultivators in Los Angeles and beyond for reliable performance in high-demand environments. Clean & Safe: Low heavy metal content, meeting strict safety standards for premium crop quality. Versatile Application: Suitable for use with Athena’s Pro Line or Blended Line, adaptable to various growing techniques and setups. How to Use Athena Pro Core Mix Thoroughly: Dissolve Athena Pro Core into water, ensuring it is fully dissolved before adding additional nutrients. Combine with Other Nutrients: Use in combination with Athena Pro Grow or Bloom to create a comprehensive feeding schedule tailored to your plants’ needs. Adjust for System Type: Perfect for hydroponic systems, including recirculating, drain-to-waste, and large grow rooms of Los Angeles cultivators. Monitor pH & EC: Check and adjust pH and electrical conductivity to optimise nutrient absorption. Ideal Uses Commercial Grow Rooms: Designed for professional environments where precision and efficiency are paramount. Hydroponic Systems: Works seamlessly with hydroponic setups, providing consistent and sediment-free nutrient delivery. Blended or Pro Line: Compatible with Athena’s full range of nutrients, allowing growers to tailor feeding regimens for peak performance. Product Specifications Type: Fully soluble dry fertiliser Nutrient Profile: Balanced blend of macronutrients and trace elements Solubility: 100% soluble, leaving no sediment or particulates Heavy Metal Content: Minimal, meeting high safety standards for cultivation Why Choose Athena Pro Core? No Sediment, No Hassle: Ensures clean irrigation lines and consistent nutrient delivery. Trusted by Pros: Used in top grow rooms of Los Angeles and California, where healthy growth and crop quality are essential. Comprehensive Nutrition: Provides the essential nutrients your plants need for strong growth, from seedling to harvest. Safe & Effective: Low heavy metal content for safe use on consumable crops, with reliable results every time. Tips for Best Results Mix Carefully: Ensure full solubility before adding other nutrients to prevent clumping or inconsistencies. Customise Your Feeding: Combine with other Athena nutrients to create the perfect blend for your crops. Monitor Regularly: Check pH and EC levels frequently to maintain optimal growing conditions. Order Athena Pro Core Today Boost your plant growth with Athena Pro Core, the fully soluble dry fertiliser trusted by Los Angeles cultivators. Order now from Senua Hydroponics and experience clean, efficient nutrient delivery for your crops. Perfect for commercial grow rooms and hydroponic setups!

Regular price £74.99
Regular price Sale price £74.99
Unit price  per 
View product
Athena - Pro Line - Grow

Athena - Pro Line - Grow

Athena - Pro Line - Grow — Pack sizes and options: 4.55 kg; 11.3 kg. Athena Nutrients - Pro Line Grow for Strong, Healthy Vegetative Growth Athena Pro Line Grow is a premium nutrient solution designed to provide the essential macro and micro-nutrients that plants need during the vegetative stage. This phase of growth is critical for establishing a strong foundation of healthy roots, stems, and foliage, ensuring that plants are prepared to produce abundant flowers and fruits later in the cycle. Formulated with the perfect balance of nitrogen, phosphorus, and potassium, along with vital micronutrients, Athena Pro Line Grow supports fast, vigorous growth in both hydroponic and soil-based systems. Whether you're growing in coco coir, soil, or hydroponics, Athena Pro Line Grow helps plants achieve their full potential by promoting strong structural development, robust root systems, and lush, green foliage. It is a key part of a well-balanced nutrient programme that helps growers achieve optimal plant health and performance. Why Use Athena Pro Line Grow for Vegetative Growth? Plants in the vegetative phase require higher levels of nitrogen to support leaf and stem growth. Athena Pro Line Grow delivers the essential nutrients plants need to maximise vegetative development, ensuring that they grow healthy and strong before transitioning into the flowering stage. This nutrient blend helps plants achieve rapid growth, enabling them to reach their full size and maximise their yield potential during the bloom phase. Benefits of Athena Pro Line Grow Optimised Nitrogen Levels: Nitrogen is a key element during the vegetative stage, promoting lush foliage and strong stem development. Athena Grow provides the ideal nitrogen levels for robust growth. Boosts Root and Stem Development: Athena Grow encourages the development of healthy roots and sturdy stems, ensuring that plants have the structural integrity to support large yields during flowering. Micronutrient Support: The formula includes essential micronutrients like iron, zinc, and manganese, preventing nutrient deficiencies and promoting overall plant health. Versatile for Multiple Growing Systems: Whether you're growing in hydroponics, coco coir, or soil, Athena Pro Line Grow integrates smoothly into your system, providing a complete nutrient solution. Enhanced Vegetative Growth: Athena Grow helps plants grow faster and stronger, producing larger, healthier plants ready for a productive flowering stage. How Athena Pro Line Grow Works During the vegetative stage, plants require more nitrogen to support leaf and stem development. Nitrogen is vital for chlorophyll production, which allows plants to photosynthesise efficiently and convert light into energy. Athena Pro Line Grow also includes a balanced blend of phosphorus, which supports root development, and potassium, which aids in overall plant health and nutrient uptake. The addition of micronutrients ensures that plants receive a full spectrum of essential nutrients, preventing common deficiencies that can slow growth or lead to poor performance during later stages of the growth cycle. How to Use Athena Pro Line Grow for Best Results Dosage: Follow the recommended dosing instructions provided on the packaging to apply Athena Grow during the vegetative phase. Mixing: Ensure thorough mixing when adding Athena Grow to your nutrient solution. Stir well to create an even distribution of nutrients. Monitor Growth: Keep an eye on your plants' development, adjusting nutrient levels as needed to support rapid growth and prevent deficiencies. Support Healthy Vegetative Growth with Athena Pro Line Grow from Senua Hydroponics At Senua Hydroponics, we provide Athena Pro Line Grow to support your plants during the critical vegetative stage. Whether you're growing in hydroponics, coco, or soil, Athena Grow provides the essential nutrients your plants need for strong, healthy growth and prepares them for an abundant flowering stage.  

Regular price £74.99
Regular price Sale price £74.99
Unit price  per 
View product
VEG+BLOOM Tap/Hard Base – Powder Nutrient for Hydroponics & Aeroponics | Vegetative Growth & Flowering

VEG+BLOOM Tap/Hard Base

VEG+BLOOM Tap/Hard Base – Powder Nutrient for Hydroponics & Aeroponics | Vegetative Growth & Flowering VEG+BLOOM Tap/Hard Base by Hydroponic Research is a professional, single-part, water-soluble powder nutrient specially formulated for growers using hard or mineral-rich tap water. Designed to provide complete plant nutrition throughout vegetative growth and flowering, this concentrated fertiliser supports strong root development, healthy foliage, vigorous plant growth and productive flowering. Its specialised mineral formula helps compensate for the alkalinity commonly found in hard water, making it ideal for growers who want a simple, effective feeding programme without the need for separate Grow and Bloom nutrients. Suitable Growing Media & Systems VEG+BLOOM Tap/Hard is designed for hydroponic and aeroponic cultivation using tap water with a starting EC between 0.3–0.7 mS/cm. Suitable growing media and systems include: Rockwool: Ideal for rockwool blocks, slabs and hydroponic growing systems. Clay Pebbles: Suitable for expanded clay aggregates used in active hydroponic systems. Grow Stones: Compatible with inert hydroponic growing substrates. Perlite: Suitable for inert, well-draining hydroponic growing media. NFT Systems: Suitable for Nutrient Film Technique cultivation. DWC Systems: Suitable for Deep Water Culture and water-based growing systems. Flood & Drain: Compatible with ebb and flow hydroponic systems. Aeroponics: Suitable for aeroponic systems where roots are suspended and fed using nutrient mist. Drip Irrigation: Suitable for hydroponic drip-fed systems. The manufacturer's feeding chart also identifies peat as a compatible medium. However, VEG+BLOOM Dirty is the preferred formulation for conventional soil and peat-based cultivation, while VEG+BLOOM RO/Soft is recommended for coco and softer water supplies. Recommended Dilution Rates VEG+BLOOM Tap/Hard is a concentrated powder nutrient that dissolves directly into water. Standard dosage: approximately 0.8–1.6g per litre, depending on the growing stage and plant requirements. Growth Stage Dosage per Litre Seedlings & Rooted Cuttings 0.8g Vegetative Growth 1.6g Transition to Flowering 1.6g Early Flowering 1.6g Mid Flowering 1.6g Late Flowering 0.8g Final Flowering Stage Discontinue base feed according to schedule Example Mixing Quantities For established plants requiring approximately 1.6g per litre: Water Volume VEG+BLOOM Tap/Hard 1 Litre 1.6g 5 Litres 8g 10 Litres 16g 20 Litres 32g 50 Litres 80g 100 Litres 160g These figures are rounded conversions of the manufacturer's medium-strength feeding chart, which recommends 3g or 6g per US gallon depending on the growth stage. Mixing Instructions: Fill the reservoir with the required volume of tap water. Accurately weigh the recommended quantity of VEG+BLOOM Tap/Hard powder. Gradually add the powder to the water while stirring. Mix thoroughly until completely dissolved. Measure the EC and pH of the solution. Adjust the nutrient strength and pH according to plant requirements. The formulation is designed to help bring the nutrient solution into a suitable working pH range, although pH should always be checked after mixing. When to Use During the Growing Cycle Growth Stages: Rooting, Vegetative Growth & Flowering VEG+BLOOM Tap/Hard is designed to be used as the main base nutrient throughout most of the growing cycle, eliminating the need to change between separate vegetative and flowering fertilisers. Propagation & Root Development (Approximately 14 Days): Begin feeding established seedlings and rooted cuttings at approximately 0.8g per litre to support early plant development. Vegetative Growth: Increase the dosage to approximately 1.6g per litre to encourage healthy leaves, strong stems and vigorous root development. Transition to Flowering (First 14–21 Days): Continue feeding at approximately 1.6g per litre to support the transition from vegetative growth to flowering. Early & Mid Flowering (Approximately 3–4 Weeks): Maintain approximately 1.6g per litre to provide essential nutrients during flower formation and development. Late Flowering (Approximately 1–2 Weeks): Reduce the concentration to approximately 0.8g per litre as plants approach maturity. Final Flowering Stage: Discontinue VEG+BLOOM Tap/Hard according to the manufacturer's finishing schedule. Key Benefits Complete single-part powder base nutrient. Specifically formulated for hard and mineral-rich tap water. Suitable for hydroponic and aeroponic growing systems. Supports vegetative growth and flowering using one formula. Encourages strong roots, healthy leaves and vigorous plant development. Supplies essential macro and micronutrients. Highly concentrated, water-soluble powder formula. No need for separate Grow and Bloom base nutrients. Helps compensate for alkaline water supplies. Suitable for recirculating and run-to-waste hydroponic systems. Easy to measure, mix and apply. Ideal for professional and hobby hydroponic growers. VEG+BLOOM Tap/Hard Base offers a simple, efficient and reliable feeding solution for growers using hard tap water. Its concentrated, single-part powder formulation provides balanced nutrition from early growth through flowering, helping plants develop strong roots, healthy foliage and productive flowers while simplifying nutrient management.

Regular price £17.99
Regular price Sale price £17.99
Unit price  per 
View product

Powdered Base Nutrients